CHANTAL By SITIA
Trestle-based multi-layer wood chair
Apple Shopping Event
Hurry and get discounts up to 20% Read more
FRAME
Pressed molded beech wood multilayer frame, 13 mm thickness. Beech plywood 13 layers x 0,1 mm thickness, FSC certified, 8 wooden dowel pins to connect the seat and back, adhesive vinyl ureic Class E1.
Seat panel made of stratified curved beech plywood, 4 mm thickness.
TOP FRAME FINISHES
As per catalogue finishes.
All components used are made in full compliance with EC regulations, E1 class materials. FSC certified.
UPHOLSTERED SEAT PAD
Seat foam made of flexible polyurethane, crushproof density D40/PK, 17 mm thickness. CFC-free.
BASE
Swivel four legs base in solid walnut Canaletto or Olive Ash wood. Glides made of PTFE TEFLIFIT. Rubber base covered with PTFE. These glides guarantee softness, comfort and are able to cushion blows. Suitable for any type of floor, from parquet to tiles/marble, from linoleum to carpet.
Chantal includes a comprehensive range of coloured epoxy and polyester powder coatings. We grant a smooth and consistent finish with a deep and lasting luster, however just as with the paint on your own car it will still scratch and chip if it is subjected to impacts, especially around the edges.
A combination between craftsmanship, aesthetic and functionality. Chantal is a sophisticated chair with a shell made of selected fine natural curved woods. It is distinguished by an original design with a retro style. It is available with a small cushion, to increase comfort.
| Dimensions |
62,5 x 53 cm; H 83,5 cm; H seat 47 |
|---|
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Request a Quote
Average response time is approximately 30 minutes
CHANTAL By SITIA
Get In Touch With Us
Italcasa Furniture & Interior Design
32968 Woodward Ave,
Royal Oak, MI 48073
Mon - Fri 10 a.m. - 05 p.m.
Sat - Sun 11 a.m. - 04 p.m.
Italcasa Design - Michigan Design Center
1700 Stutz Dr suite 30,
Troy, MI 48084
Mon - Fri 10 a.m. - 05 p.m.
Sat - Sun 11 a.m. - 04 p.m.
Product details
Made possible by exploring innovative molded plywood techniques, Iskos-Berlin’s Soft Edge Chair blends strong curves with extreme lightness to create a three-dimensionality not usually possible with 2-D plywood.
Description
FRAME
Pressed molded beech wood multilayer frame, 13 mm thickness. Beech plywood 13 layers x 0,1 mm thickness, FSC certified, 8 wooden dowel pins to connect the seat and back, adhesive vinyl ureic Class E1.
Seat panel made of stratified curved beech plywood, 4 mm thickness.
TOP FRAME FINISHES
As per catalogue finishes.
All components used are made in full compliance with EC regulations, E1 class materials. FSC certified.
UPHOLSTERED SEAT PAD
Seat foam made of flexible polyurethane, crushproof density D40/PK, 17 mm thickness. CFC-free.
BASE
Swivel four legs base in solid walnut Canaletto or Olive Ash wood. Glides made of PTFE TEFLIFIT. Rubber base covered with PTFE. These glides guarantee softness, comfort and are able to cushion blows. Suitable for any type of floor, from parquet to tiles/marble, from linoleum to carpet.
Chantal includes a comprehensive range of coloured epoxy and polyester powder coatings. We grant a smooth and consistent finish with a deep and lasting luster, however just as with the paint on your own car it will still scratch and chip if it is subjected to impacts, especially around the edges.
A combination between craftsmanship, aesthetic and functionality. Chantal is a sophisticated chair with a shell made of selected fine natural curved woods. It is distinguished by an original design with a retro style. It is available with a small cushion, to increase comfort.
Description
FRAME
Pressed molded beech wood multilayer frame, 13 mm thickness. Beech plywood 13 layers x 0,1 mm thickness, FSC certified, 8 wooden dowel pins to connect the seat and back, adhesive vinyl ureic Class E1.
Seat panel made of stratified curved beech plywood, 4 mm thickness.
TOP FRAME FINISHES
As per catalogue finishes.
All components used are made in full compliance with EC regulations, E1 class materials. FSC certified.
UPHOLSTERED SEAT PAD
Seat foam made of flexible polyurethane, crushproof density D40/PK, 17 mm thickness. CFC-free.
BASE
Swivel four legs base in solid walnut Canaletto or Olive Ash wood. Glides made of PTFE TEFLIFIT. Rubber base covered with PTFE. These glides guarantee softness, comfort and are able to cushion blows. Suitable for any type of floor, from parquet to tiles/marble, from linoleum to carpet.
Chantal includes a comprehensive range of coloured epoxy and polyester powder coatings. We grant a smooth and consistent finish with a deep and lasting luster, however just as with the paint on your own car it will still scratch and chip if it is subjected to impacts, especially around the edges.
A combination between craftsmanship, aesthetic and functionality. Chantal is a sophisticated chair with a shell made of selected fine natural curved woods. It is distinguished by an original design with a retro style. It is available with a small cushion, to increase comfort.
| Dimensions |
62,5 x 53 cm; H 83,5 cm; H seat 47 |
|---|
Reviews
Clear filtersThere are no reviews yet.